Sensoray 3011S - Manual (Page 21)

Once the 3011 receives a network packet addressed to it, the temporary IP address will
be in effect. To send a packet either ping the board or connect to it with a browser. Using
an IP address from the example, either run
ping 10.135.1.61
or type
http://10.135.1.61
into the address bar of your browser on the computer connected to the same network as
the 3011. Once the temporary address is enabled the red LED will blink fast several
times and go off.
Once the unit is accessible using a temporary IP address, the standard Web page
procedure (Step 2) can be used to set up the desired permanent IP address and other
settings.
Step 2 – Setting up a permanent IP address
Connect to the unit with a Web browser by typing the unit's temporary IP address in the
address field.
Example:
http://10.135.1.61
Once the Main Menu page is displayed, select Admin/Network.
Type in the desired permanent IP address and subnet mask values into corresponding
fields. Please note that there are 2 static configurations available. Make sure that the one
that you need is selected in the “Network mode” list-box before clicking on Submit. Now
the unit's new IP address is set. The browser redirects to the new address automatically.
21