Sensoray 811 - Manual (Page 15)

15
Specifications
Video Formats NTSC, PAL, SECAM
Video Inputs 4 input channels, simultaneously:
4 Composite video via 4 NBC connectors, 75 Ohms; or
4 S-Video via a 34-pin breakout connector, 75 Ohms; or
combinations up to 4 channels , 75 Ohms
Audio Inputs 4 input channels: associated with 4 separated video channels
Stereo or mono for each channel, via four 3.5mm TRS
StereoJacsk;
Or, break-in stereo/mono signal from a 34-pin connector
Signal level: Line-in level, +/- 1.0V
Capturing Mode Raw:
RGB or YUV
Capture rate Up to: 120 (30x4) frames/sec for NTSC/RS-170/CCIR
100 (25x4) frames/sec for PAL/SECAM
Frame/Video
Encoding Could be done by software and/or 3 rd party CODEC:
JPEG, MPEG-1/2/4, MJPEG, and H.264
Resolution Up to Full-D1:
NTSC: 720x480 PAL: 720x576
Supported:
D1.N: 720x480 D1.P: 720x576 D.5: 480x352
SIF: 352x240 2SIF: 704x240 4SIF: 704x480
VGA: 640x480 QVGA: 320x240 QQVGA: 160x112
CIF: 352x288 QCIF: 176x144 SQCIF: 128x96
4CIF: 704x576
Digital I/O 4 inputs + 4 outputs: TTL signals
4 configurable inputs/outputs, via I/O terminals;
all 4 inputs + all 4 outputs on breakout 34-pin connector
Bus PCI-Express x1: Compliant of
PCI-Express Base Specification (Revision 1.0/1.1)
PCI-to-PCI Bridge Specification (Revision1.2)
OS Platform Windows and Linux
Power 6.6W, +3.3V @ 2A
Temperature 0 – 70 C
Board Size 4.2” x 4.2” (107mm x 107mm)