Seaward Powerguard Mobile - Manual (Page 28)

Seaward PowerGuard Pro User Manual.
- 26 - Rev. 1.3
9.0 Scanned Signatures
You can add your scanned signature to certificates and reports if required. Any image format can be
used along with any image size. If the signature image is too large then PowerGuard will resize the
image accordingly.
To add your scanned signature to PowerGuard, following the steps listed below.
1. Click the Tools menu and select the Settings item.
2. The Settings dialog will then be displayed as shown in the picture below. Click the
Engineers item.
3. The list of available engineers will then be shown. Select the Engineer you want to setup a
scanned signature for from the dropdown list.
4. Once you have selected the required engineer, click the Browse… button to select a signature
image file. The Open Signature dialog will then be displayed from which you can select an
image file.