Seaward Powerguard Mobile - Manual (Page 16)

Seaward PowerGuard Pro User Manual.
- 14 - Rev. 1.3
2.2 Printer Alignment
Printer Alignment allows you to align the printing of the text on NICEIC certificates and reports to
match that of your printer. Due to all printers being different, you may need to adjust the left or top
alignment to suit.
If you find that text is being overprinted too far left or right, then increase the left alignment slightly
and try the print again. The same applies to the top and bottom alignment, adjust this value
accordingly.
To setup Printer Alignment for NICEIC Certificates, following the steps listed below.
1. Click the Tools menu and select the Printer Alignment item. The Printer Alignment
settings dialog will then be displayed.
2. Select the required certificate you want to change alignment for from the dropdown list, or
select the All Certificates item to change alignment for all certificates.
3. Adjust the values accordingly for either the portrait or landscape certificates. When finished,
click the OK button.