Seaward PATGuard Work About Quick start - Manual (Page 4)

v Uploading to the tester
Assets to be Uploaded are contained in the records (xpg) file
therefore it is necessary to have transferred the appropriate xpg
file to the PDA. See previous section.
Note: You can only Upload Assets which have originally been
created by a compatible tester. See Preparation section.
To Upload all Assets within the xpg file
1. Select Upload from the Tools menu.
2. De-select the PrimeTest checkbox if you’re
uploading to a Supernova or Europa tester.
3. Ensure the tester is ready to receive
Upload data – see the tester’s Operating
Instructions for details.
Select Upload on the PDA.
Note: Only full tests are Uploaded.
To Upload selected Assets – Tagged Upload
1. To Upload all Assets within a Site or
Location – select and hold the required Site
or Location then select ‘Tag for Upload’.
To Upload individual Assets select the box
against the relevant Asset(s).
Once all the necessary Assets have been
Tagged, carry out the Upload as above.
336A553 Rev 2