Sea Eagle Classic Motormount SE-8 and 9 (SE 8, Classic SE 9) - Manual (Page 5)

Inflation Valves & Pumps
One-Way Air Valves
Place the retainer ring
over the valve base and
screw the valve into the
base. Unscrew the
outer cap on the valve
to reveal the inflation
port.
Pipe Valves
These simple, compact
valves are used on both
the inflatable FHS &
SED seats and the floor
chambers of your boat.
Foot Pump
The foot pump is a high
capacity pump made of
durable ABS plastic. To
use simply press the
two halves of the foot
pump together and con-
nect the hose to the in-
flation port marked
OUT.
The triple nozzle
adapter comes with the
foot pump and is
needed to inflate both
the one-way air valve
and the pipe valves.
Insert the ribbed end of
the large rounded
adapter piece into the
hose of your foot pump.
Inflation Valves & Pumps
To inflate a one-way
valve, simply place the
adapter into the valve
and begin pumping with
your foot pump. When
you’re finished, screw
the outer cap of the
valve closed.
To inflate a pipe valve,
first attach one of the
cone shaped nozzles
into the large rounded
adapter and insert it into
the pipe valve and
begin pumping with
your foot pump.
To close, tightly pinch
the middle of the valve
with your forefinger and
thumb while removing
the pump nozzle from
the valve. Squeeze
tightly, and hold the
valve at the very bottom
to prevent the air from
seeping out while you
plug the valve at the
top.
MB-80 Electric Pump
(OPTIONAL)
This electric pump
works using the 12V
power outlet in your car.
Please note that the
star shaped valve
adapters and deflation
cap are not necessary
for Sea Eagle boats.
4