Sea Eagle Hybrid SUP (HB96) - Manual (Page 9)

Deluxe Kayak Seat
(OPTIONAL)
The Deluxe Kayak Seat
(DKS) has two interntal
bladders, two white
one-way valves and
two blue straps with
clips for securing the
seat to the D-rings onto
the EVA foam Diamond
Deck Pad.
One-Way Air Valve
(Found only on DKS)
Tether the valve cap
onto the base of the
seat by stretching the
retainer ring to fit over
the groove in the base.
Stretch the ring if it is
too tight.
The hand pump comes
with a second hose that
has a smooth valve
adapter attached at one
end. Use this adapter
to inflate the DKS.
Insert the adapter into
the valve and inflate the
chambers. The back
takes 12-14 strokes to
inflate and the base
takes 6-7 strokes.
Kayak Paddle
(OPTIONAL)
The asymmetrical
spoon blade design of
this kayak paddle will
allow for a smooth
entry and an even pull,
maximizing the power
from each stroke. They
will also require less
gripping force.
Put the shaft together
first. Insert the shaft
piece with the button
into the piece with three
holes. Lock the button
in the middle hole.
Next, slide the drip
guards up the shaft to
about an inch above
the button hole. Insert
the blades into the
shaft and adjust until
the button locks the
blade in place.
The additional holes in
the shaft are for “feath-
ering” the blades.
Blades can be offset
45° from each other.
This makes paddling
into a stiff breeze easier
as the blade that is not
in the water will be able
to slice through the
wind with little resist-
ance.
8
SeaEagle.com/Instructions SeaEagle.com/Instructions