Sea Eagle Hybrid SUP (HB96) - Manual (Page 5)

Recessed Air Valves
A recessed one-way air
valve is featured on the
Sea Eagle Hybrid SUP
for inflation.
Remove the caps,
press and turn the
valve stems counter-
clockwise so that the
stem is in the UP posi-
tion. When the stems
are in the up position
the valve will retain air.
Hand Pump
This T-handle pump
can easily reach the
working pressure for
the Hybrid SUP. The
pump comes with a
mesh bag, manometer
(pressure gauge) and a
hose.
On the top of the pump
is the word INFLATE
with an arrow pointing
to the port. Locate your
inline pressure gauge
and attach it here.
With the pressure
gauge in place you can
now attach the hose.
Insert the hose with the
recessed valve adapter
into the gauge and twist
it to lock. Hold the
gauge when twisting
the hose. At the end of
the pump hose is the
recessed valve adapter
(shown below).
When ready to inflate,
insert the adapter into
the valve, turn it to the
right until it is fully
seated and then begin
inflation.
If you do not have one
of our electric pumps,
go to page 7 of this
manual for Assembly &
Inflation Instructions.
4
Hybrid SUP | INFLATION: INFLATION: Valves & Pumps