Sea Eagle Hybrid SUP (HB96) User Manual
Page 10

DEFLATION
DEFLATION
To deflate, push down
on the center valve
stem and quarter turn it
to the right. The stem
will stay in the down
position, allowing the
air to escape. Be sure
that your eyes and your
face are not directly
over the valve.
Fold the back end of
the board over to reveal
the skegs. Unclip and
slide the skegs out of
their bases.
Fold the board back on
itself between the skeg
bases.
Begin folding the board
toward the bow.
Fold until the board fits
in the carry bag.
Backpack Carry Bag
Next store the folded
board inside the carry
bag. If you’ve taken
your time and folded
tightly, you should have
plenty of room for a
paddle (broken down),
seat, pumps and other
small items.
STORAGE
STORAGE
In extremely cold temperatures, PVC material becomes
brittle. You can still safely store your Sea Eagle in these
conditions, so long as you avoid dropping it and so long as
you do not subject it to any sudden impacts. Although you
can store your boat fully inflated, you may wish to store
your Sea Eagle rolled up inside of the bag.
If you’re planning to leave your Sea Eagle outside, be sure
to keep it raised up off of the ground. Its also a good idea to
keep it covered so that it is not directly exposed to berries,
leaves, rain, sunlight and other elements. Sea Eagles that
are left in water will most likely have to be emptied from
time to time.
Make sure that your boat and accessories are dry before
storing to remove moisture that could cause mildew.
Choose a cool, dry spot when storing in an enclosed area
like basement, closet or garage.
Rodent proof the storage area. Mice, squirrels and other
small rodents can do a lot of damage to your Sea Eagle.
Avoid excessive heat when storing your board. Do not store
Sea Eagle in an attic or metal shed.
9
Hybrid SUP |
DEFLATION & STORAGE
DEFLATION & STORAGE