Sea Eagle Hybrid SUP (HB96) User Manual
Page 6
BTP Turbo & BP12
Electric Pumps
(OPTIONAL)
These electric pumps
comes with a nylon
shoulder carry bag,
12V DC power supply,
hose and adapters.
WARNINGS: Keep out
of the reach of children,
Don’t leave running un-
attended. Do not use
inflator for more than
20 minutes continu-
ously as this can cause
overheating and dam-
age.
The carry bag has com-
partments for the
pump, battery hose.
Protect the inflator from
sand by keeping it in
the bag provided, if
sand gets in the inflator
it could get JAMMED.
Included are a cluster
of adapters, with raised
numbers on each arm
of the cluster. The
adapter marked #1 is
the only adapter
needed to inflate your
Sea Eagle.
Take adapter number
#1 and firmly push it
into the grey tube in the
end of the hose. Make
sure that the adapter is
fully seated on the tube
by pushing it until the
end of the tube pushes
past the raised ring in
the adapter.
Connect the other end
of the hose to the red
inflation port at the top
of the pump, located
near the ON and OFF
buttons.
Adjust the pressure dial
to read between 12 and
15 PSI, the operating
pressure of your Sea
Eagle. PSI is marked in
red on the dial.
ATTENTION: Never
turn the dial when the
device is under pres-
sure as this will imme-
diately cause the
instrument to break.
5
SeaEagle.com/Instructions
SeaEagle.com/Instructions