Sea Eagle FoldCat (375FC) - Manual (Page 5)

Recessed Air Valves
Remove the cap and
press and turn the valve
stem counterclockwise
so that the stem is in
the UP position. Only
when the stem is in the
up position the valve will
retain air. Turning the
stem clockwise and
down will put the valve
in the position for defla-
tion.
A-41 Foot Pump
The A-41 Foot Pump is
a high capacity pump
made of durable ABS
plastic. To use simply
press the two halves of
the foot pump together
and connect the hose to
the inflation port marked
OUT. Insert the valve
adapter at the other end
of the hose.
Recessed Adapter
The recessed valve
adapter is located inside
of the orange repair kit
canister. Insert the
ribbed end of the valve
adapter into the hose on
the foot pump. This
valve adapter is not
compatible for use with
electric pumps.
Make sure that the
valve stem is in the up
position and insert the
valve adapter into the
valve and turn clock-
wise to lock into posi-
tion. Once the desired
pressure is reached you
should feel a stong
resistance on the foot
pump.
Inflation Valves & Pumps
BTP Turbo
(OPTIONAL)
The BTP Turbo electric
pump comes complete
with a nylon shoulder
carry bag, 12V DC
power supply, hose and
adapters.
Included are a cluster of
seven valve adapters,
with raised numbers on
each arm of the cluster.
The adapter marked
number 1 is the only
adapter needed for your
Sea Eagle.
Take adapter number 1
from the cluster and
firmly push it into the
grey tube that is already
connected to the end of
the hose. To ensure that
the adapter is on as
tight as possible, push it
past the raised ring that
is inside of the adapter.
Connect the other end
of the hose to the red
inflation port at the top
of the pump, located
near the ON and OFF
buttons.
4
INFLATION, VALVES & PUMPS