Sea Eagle FoldCat (375FC) - Manual (Page 10)

3M Marine Cleaner
(OPTIONAL)
Cleans, shines, condi-
tions and protects vinyl,
rubber and plastic sur-
faces. Deep cleans dirt
and grime, enhances
appearance. Restores
natural sheen, protects
surfaces. Fresh lemon
scent.
303 Protectant
(OPTIONAL)
We all try to keep our
boats clean, but their
are some stains you just
can't avoid. 3M Marine
Cleaner & Restorer can
remove the toughest
stains from mud, bird
droppings, oil, and
many others.
Torqeedo Travel 1003s
(OPTIONAL)
Delivering the power
and performance of a
3HP gas motor, the
Torqeedo Travel weighs
just 29.5 lbs.
Please specify motor
before ordering as the
375FC takes the 1003s
(short shaft) model.
Minn Kota Motors
(OPTIONAL)
Minn Kota Motors are
the most reliable electric
trolling motors on the
market. These motors
run off a 12v deep cycle
marine battery (which is
not included or sold by
Sea Eagle).
Portable Charger
(OPTIONAL)
Protect and preserve
your battery life with this
portable 10 AMP, Minn
Kota battery charger.
Features fully automatic
3-stage charging.
Weighs 17 lbs.
Input: 120V AC
Output: DC 12V
Battery Power Center
(OPTIONAL)
Allows trolling motor
leads and charger leads
to be connected without
opening the box. Built-in
battery meter includes
two 12-volt accessory
plugs and three manual
reset circuit breakers.
Fits group 24 and 27
size batteries.
TIP: Never connect the
(+) and the (-) terminals
of the battery together.
Take care that no metal
object can fall onto the
battery and short the
terminals. This would
immediately lead to a
short and utmost fire
danger.
Although PVC material can become brittle in extremely cold
temperatures, you can still safely store your Sea Eagle in
them so long as you avoid dropping it and do not subject it
to any sudden impacts.
If you’re planning to leave your Sea Eagle outside, be sure
to keep it raised up off of the ground. Its also a good idea to
keep it covered so that it is not directly exposed to berries,
leaves, rain, sunlight and other elements. Sea Eagles that
are left in water will most likely have to be emptied from
time to time.
Make sure that your boat is dry before storing your FoldCat
for more than a few days, to remove any excess moisture
that could cause unsightly mildew. Choose a cool, dry spot
when storing in an enclosed area like basement, closet or
garage. Before you begin the deflation process, remove the
sats, rod holders, casting bar and motor mount.
9
DEFLATION & STORAGE