Scotsman RS160 - Manual (Page 24)

REMOVAL & REPLACEMENT
To Replace Solenoid:
1. Disconnect electrical power.
2. Lift up and pull out and remove upper front
panel. Remove fluorescent tube
3. Remove 2 thumb screws holding lower brace
and remove.
4. Remove 3 thumb screws holding upper ice
chute cover, and remove cover. Remove the metal
solenoid cover.
5. Disconnect electrical leads from solenoid.
6. Straighten cotter pin, and remove pin from
solenoid plunger.
7. Remove rubber mounting screws holding
solenoid to cabinet, and remove solenoid from
cabinet.
8. Reverse to reassemble.
To Replace Light:
1. Disconnect electrical power.
2. Pull out and remove upper front panel.
3. Twist fluorescent tube out of sockets.
4. Reverse to reassemble.
Electrical Shock Hazard
Unplug unit before
servicing.
RS160 and RS220
June 1995
Page 24