Scotsman NSE650 - Manual (Page 2)

FOR THE INSTALLER
Installation Limitations:
This ice system is designed to be installed indoors,
in a controlled environment:
Min. Max.
Air Temperature 50
0
F 100
0
F
Water Temperature 40
0
F 100
0
F
Water Pressure 20 PSI 80 PSI
Voltage 104 126
(Compared to the nameplate)
Operating the machine outside of the
limitations is misuse and can void the warranty.
When installing a new system, check to be sure
that you have everything you need before
beginning:
Correct Ice Machine (air or water cooled)
All kits, legs, and information required for
the specific job.
Max.
Fuse
Size
Refrigerant
Charge
(R-404a)
Model Number
NSE650AE-1A
NSE650WE-1A
Dimensions
(w/o legs)
H x W x D
37.5" x 38.06" x 29.5"
same
Basic
Electrical
115/60/1
same
Ice Type
NUGGET
same
Condenser
Type
Air
Water
Minimum
Circuit
Ampacity
20
20 25 ounces
20 ounces 35
30
The normal finish for the ice machine is
enamel-sandalwood. A stainless steel panel kit,
SPKNS650 may be field installed to convert the
unit to a stainless steel finish.
Note: Minimum Circuit Ampacity is used to determine wire size and type per national electric code.
SPECIFICATIONS: ICE MAKER
NSE650
June 1994
Page 2