Scotsman CD200 - Manual (Page 5)

Electrical Connections
Ice Machine Power
Connection
Separate Circuits
for Dispenser and
Ice Machine
Dispenser Power
Connection
Electrical Connections,
Electronic Model Shown
DISPENSER
Connect the electrical power to the junction box at
the rear of the dispenser cabinet.
See the dispenser’s nameplate (located on the
back) for the electrical voltage, minimum circuit
ampacity and maximum fuse size. The unit
requires a solid chassis to earth ground wire. See
the wiring diagram.
The dispenser should be connected to a separate
circuit. Voltage variation must not exceed ten
percent above or below the nameplate voltage at
any time.
FOLLOW ALL LOCAL, STATE and NATIONAL
CODES.
ICE MACHINE
Connect the electrical power to the junction box at
the back of the ice machine. Follow the directions
in the ice machine’s manual.
CD200
January 1996
Page 6