Scotsman CD200 - Manual (Page 4)

Electronic Cuber Model Shown
BIN CONTROL
Bin Thermostat Models: A bin thermostat bracket
is built into the top of the CD200. After the ice
machine has been placed on the top of the
CD200, route the bin thermostat capillary tube
from the control box of the ice machine, thru the
routing hole at the back of the ice machine’s water
reservoir, and into the tubular bracket in the top of
the CD200. Check to be sure that the bin
thermostat’s capillary tube is IN the bracket and
that it stops at the end of the tube.
Electronic Models: CD200s mfg. beginning May
1997 have an internal thermostat with wiring
harness. The wiring harness must be routed from
the CD200 to the CME256, CME506 or CME656.
Follow instructions supplied separately on the
CD200.
The Baffle and Thermostat bracket were
discontinued beginning with May 1997 production.
Note: Prior CD200s without the removable bin
thermostat plate must be retrofitted with kit,
KBTCD200.
Cabinet Assembly
CD200
May 1997
Page 5