beautypg.com

Conform to all applicable codes, For the electrician – Scotsman MDT5N25 User Manual

Page 8

background image

FOR THE ELECTRICIAN

CONFORM TO ALL APPLICABLE CODES

The electrical power to the unit is
supplied through the junction box at the
rear of the machine.

Check the nameplate (located on the
back panel) for the voltage
requirements, and for the minimum
circuit ampacity. The machine requires
a solid chassis to earth ground wire.

The ice maker should be connected to
its own electrical circuit so it is
individually fused. Voltage variation
must remain within design limitations,
even under starting conditions.

All external wiring must conform to
national, state, and local electrical
codes. The use of a licensed
electrician is required to perform the
electrical installation.

MDT5N25 & MDT5N40 User Manual

November 2008

Page 7

JUNCTION BOX

Internal to back panel on

some models

INDIVIDUAL CIRCUIT
FOR ICE DISPENSER

This manual is related to the following products: