Scotsman MDT5N25 - Manual (Page 3)

FOR THE INSTALLER: Specifications
This ice maker-dispenser is designed to be
mounted on a machine stand, or a countertop, or
using wall mounting kit KWB3, hung from a wall.
The sink may be retained, or removed and the
optional longer splash panel (KSP5) installed in
place of the original. Instructions for each kit are
included in this service manual. Before beginning the installation, check that all the
materials and kits required are available at the
installation location.
MDT5N25 & MDT5N40 User Manual
August 2010
Page 2
14.06"
1.88"dia
20.5"
22.5"
2.56"
Optional for water and
drain lines
Serial Number Plate
inside on upper base
below control box.
ELECTRICAL JUNCTION BOX
3/8" FPT
condenser
Water Inlet
(Water Cooled)
1/2" FPT
Cond. Drain
(Water Cooled)
12.27"
1.12"
3.12"
5.12"
6.43"
4.5"
3.54"
3/8" Flare
Potable Water Inlet
NAMEPLATE
on back panel
SPECIFICATIONS
Model Number Dimensions (w/o stand)
H” x W” x D”
Basic
Electric
Cond.
Type
Ref. Charge,
R-404A in ounces*
Minimum Circuit
Ampacity
Maximum
Fuse Size
MDT5N40A-1J 48.5 x 26 x 22.5 115/60/1 Air 24 19.3 25
MDT5N40W-1J same 115/60/1 Water 17 17.8 20
MDT5N40A-6J same 230/50/1 Air 24 11.5 15
MDT5N40W-6J same 230/50/1 Water 17 10.9 15
MDT5N25A-1J 41 x 26 x 22.5 115/60/1 Air 24 19.3 25
MDT5N25W-1J same 115/60/1 Water 17 17.8 20
MDT5N25A-6J same 230/50/1 Air 24 11.5 15
MDT5N25W-6J same 230/50/1 Water 17 10.9 15
Always check the nameplate for charge info.
3/4" FPT
Drain