Scotsman C2648R - Manual (Page 4)

Model Number Description
Example
•
C2648SR-3A
•
C=cuber
•
24=nominal capacity in 100s of pounds
•
48=nominal width of cabinet in inches
•
S=cube size, S=small or half dice,
M=medium or full dice
•
R=condenser type. R=Remote
•
-3=Electrical code. = 208-230/60/3
•
A=series revision code. A=first series.
Note: In some areas of this manual model numbers
may include only the first five characters of the
model number, meaning that cube size, condenser
type and voltage differences are not critical to the
information listed there.
Options:
There are several options available for field
installation. They include:
•
Vari-Smart
ä Adjustable ice level system
•
Smart-Board
ä Advanced feature control
Some installations require bin or dispenser
adapters. See the table below.
Standard bin applications – Adapter information
Model BH1100, BH1300 or BH1600
C2648
Adapter panels included with bin, no
adapter needed
Other bins and applications:
Take note of the depth of the machine. Slope front
bins may not be deep enough to allow the bin door
to rest open against the machine. Upright bins are
recommended.
Note the drop zone and optional ultrasonic sensor
locations in the illustrations. Drop zone hole must
be 20.25" deep.
Scotsman ice systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of UL and NSF.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any part and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to change
without notice.
October 2010
Page 3
C2648
Remote Condenser Models - User Manual