Scotsman C2648R - Manual (Page 18)

Use and Operation
Once started, the ice machine will automatically
make ice until the bin or dispenser is full of ice.
When ice level drops, the ice machine will resume
making ice. There are four indicator lights at the
front of the machine that provide information on the
condition of the machine.
External Indicator Lights:
•
Power
•
Status
•
Water
•
Clean
Indicator Lights & Their Meanings
Power Status Water De-Scale & Sanitize
Steady Green Normal Normal – bin full or making ice - -
Blinking Green
Self Test
Failure
Switching on or off - -
Blinking Red -
Diagnostic shutdown or, if making
ice, temperature sensor failure Lack of
water
-
Yellow - - -
Time to de-scale and
sanitize
Blinking Yellow - - - In Cleaning mode
Light off No power Switched off Normal Normal
All Blinking Unit remotely locked out – check with leasing company
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the
machine. The water may have been shut off or the
water filter cartridges need to be changed.
If the Clean light is on, the machine has
determined that it may need to be cleaned. Contact
an authorized Scotsman service agent and have
the machine cleaned, de-scaled and sanitized.
October 2010
Page 17
C2648
Remote Condenser Models - User Manual
Other Indicators
Removal of the front panel allows review of the
Code Display and Component Indicator Lights.
Note: A Component Indicator Light switches ON to
indicate that the component is operating.
Note: There are three Curtain Switch lights, SW1,
SW2 and the Period in the display code. A curtain
switch light is ON when a curtain is either open or
not present.