Caution, Edge cleaning, Settings – Royal Vacuums UR30085 User Manual
Page 18: Cleaning lightweight flexible rugs, How to attach tool cover, Stair cleaning
![background image](https://www.manualsdir.com/files/803118/content/doc018.png)
9
edge Cleaning
Special edge groomers
are provided on both
sides of the nozzle to
remove dirt in carpet near
baseboards and furniture.
Guide either side of nozzle
parallel to edge of carpet
or furniture.
settings
For maximum cleaning performance, the following carpet
height settings are recommended:
• Lowest setting: or all types of carpet. Note: If the
cleaner is difficult to push, slide knob to the next higher
setting.
• Higher settings: for very deep pile carpet where easier
pushing effort is desired, while maintaining good clean-
ing performance.
Cleaning lightWeight
Flexible rugs
Stand on one end of rug
and move cleaner toward
other end or edge. Before
reaching edge, push
down on handle. This will
lift up the nozzle (front of
cleaner) as shown and will
prevent rug from clinging
to cleaner. Continue to lift
up nozzle so that when
you have reached the
edge, it is completely off
the rug. Move cleaner
back to start again, lower
nozzle, and use only
forward strokes.
2.11
2.13
2.12
hoW to attaCh tool CoVer
The tool cover is designed
with a “break-away”
feature which allows it to
snap free if it is pushed
open too far.
To reattach, align hinges
of cover with slots on sides
of tool storage area.
Push cover down to
secure in place.
2.14
2.10
HIGH
HARD
FLOOR
2.12 Lift vacuum by Stair Cleaning Handle and
position on stairs. Clean forward to back. Never leave
the vacuum standing on stairs when not cleaning.
stair Cleaning
CAUTION
!
!
Use extra care when cleaning on stairs. To avoid
personal injury or damage, and to prevent the
cleaner from falling, always place cleaner at bottom
of stairs on floor. Do not place cleaner on stairs or
furniture, as it may result in injury or damage.