Supported reading device models, Opening the cbx500 – Datalogic Scanning CBX500 User Manual
Page 5
CBX500
INSTALLATION
MANUAL
5
SUPPORTED READING DEVICE MODELS
The CBX500 can be directly connected to the following readers through the 25-pin connector illustrated in Figure A.
Linear Scanners
2D Readers
DS2100N DS2400N DS4800 DS6300 MATRIX-1000 MATRIX-2000
DS6400 DX6400 DS8100A
DX8200A
MATRIX
400
NOTE
CBX500 is backward compatible with DS4600A, DS2100N/DS2400N (black body), and
DS1100/DS2200 10-30 Vdc model reading devices using the ADP-MM1 25-pin gender changer.
See the Gender Changer documentation for the relative CBX500 pinout.
OPENING THE CBX500
To install the CBX500 or during normal maintenance, it is necessary to open it by unscrewing the four cover
screws:
CAUTION
The CBX500 must be disconnected from the power supply during this operation.