Display submenu – RGBLink RMS 8424S Quick Start User Manual

Page 12

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

Enter to “DISPLAY” submenu, to set the following items:

1. INFO:

Select “ON”, screen will display input signal”, “RATIO”, “SCAN”, “MARKER”, “FLIP”, ”ZOOM”

and marker set information at the up-left. Push

the “F1” button to adjust the width of the marker, and

push the “F2” button to adjust the height of the marker.

2. MARKER:

Safe area. Select “ON”, screen will display the safe area, and select “OFF” to close it.

3. TITLE: User edited title.

4. MODE: ”DISPLAY” or “TP”. Select and push “DISPLAY” option, screen will display the image. Select

“TP” and push ”DISPLAY”, screen will display test pattern to check if LCD screen operate normally.

5. MARKER 4:3:

Choose “ON”, then 4:3 scale mark on image.

6. AUTO

TP: Choose “ON”, and open the auto test pattern function.

7. AUTO TIME: The auto switch time adjustment range is 5 to 30S.