RGBLink MSP 210V Quick Start - Manual

Interfaces
4
2
NOTE
3
5
1 VGA Input Port
VGA Input
Input the video signal from H D player,
DVD, and computer, etc.
VIEWSIZE THE WORLD
MSP 210V – Quick Start
This quick start provides basic instructions for an experienced installer
to set up and operate MSP 210V.
For full installation, configuration, and operation details, please refer to
MSP 210V user manual, which is available at www.rgblink.com.
Interface Description
Input Interface
Audio Input
Input audio signals from DVD player,
set top box, hardware player, etc.
Indicator
When input analog audio signal, LED indicator4, 5 light,
when input digital AES/EBU signal, LED indicator4
lights.
Audio Input port
Indicator
Output and Other Interface
SDI Output
Can connect the next level device with SDI
interface.
USB Interface
Used to control the computer.
Interfaces
4
3 SDI Output port
Indicator 6
1 Power 2
5
USB Interface
Power indicator 2 lights when device has power
supply.
LED indicator 4 lights when output SDI signal.
LED indicator 6 lights when connect USB to
computer.
Indicator
Power
Connect one end of the power adapter with the
device, the other end into a socket. Plug in, power
indictor light means the device works normally.
The device uses the standard 12V/3A power supply.
Dial Switch
Functional Description Block Diagram
Instructions
The dial switch upwards is OFF, downwards is ON：
1. Dial switch1 OFF: mute.
MSP 210V Quick Start
Version 1.0
Page 1 of 3
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn