RGBLink MSP 216 User Manual - Manual (Page 28)

MSP 216 User Manual 28
Safety Precautions
For all MSP 216 distributor installation procedures, please observe
the following important safety and handling rules to avoid damage
to yourself and the equipment.
 To protect users from electric shock, ensure that the chassis
connects to earth via the ground wire provided in the AC power
Cord.
 The AC Socket-outlet should be installed near the equipment
and be easily accessible.
Unpacking and Inspection
Before opening MSP 216 distributor shipping box, inspect it for
damage. If you find any damage, notify the shipping carrier
immediately for all claims adjustments. As you open the box,
compare its contents against the packing slip. If you find any
shortages, contact your sales representative.
Once you have removed all the components from their packaging
and checked that all the listed components are present, visually
inspect the system to ensure there was no damage during shipping.
If there is damage, notify the shipping carrier immediately for all
claims adjustments.
Site Preparation
The environment in which you install your MSP 216 should be clean,
properly lit, free from static, and have adequate power, ventilation,
and space for all components.