RGBLink MSP 215 - Manual (Page 7)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
6
Operation Manual
MSP 215 HDMI Extender TX
Function Block Diagram
Operating Principle
Connect the computer with HDMI interface to the HDMI input port of MSP 215 HDMI Extender TX with
HDMI cable. When input HDMI signal, the signal indicator flashes, and if input HDMI signal with HDCP,
the signal indicator lights.
Connect the router to the network port of MSP 215 HDMI Extender TX with network cable. The device is
in normal work if the green light in network port lights and the yellow light (also in network port) flashes.
This is used for relay transmission.
Connect the HDBaseT TX output port of MSP 215 HDMI Extender TX to the HDBaseT RX input port
of MSP 215 HDMI Extender RX with CAT5 or CAT6 cable. The indicator beside HDBaseT TX and
HDBaseT RX port if the connection is normal.
In order to avoid the damage of device, please use the standard power adapter. The power indicator
lights when device has power supply.