beautypg.com

Operation manual, Program area – RGBLink MSP 221 User Manual User Manual

Page 24

background image

MSP 221 User Manual 24

3.

Operation Manual

Program Area

Shown as follows:

Operation Manual

1. Power on, the 7 buttons will light one by one, and then all lights go out.

2. VGA+WRITE+SAVE1+RUN: Write EDID of VGA SAVE1 to VGA IN.

3. VGA+WRITE+SAVE2+RUN: Write EDID of VGA SAVE2 to VGA IN.

4. VGA+READ+SAVE1+RUN: Write EDID of VGA OUT to VGA SAVE1.

5. VGA+READ+SAVE2+RUN: Write EDID of VGA OUT to VGA SAVE2.

6. HDMI+WRITE+SAVE1+RUN: Write EDID of HDMI SAVE1 to HDMI IN.

7. HDMI+WRITE+SAVE2+RUN: Write EDID of HDMI SAVE2 to HDMI IN.

8. HDMI+READ+SAVE1+RUN: Write EDID of DVI OUT to HDMI SAVE1.

9. HDMI+READ+SAVE2+RUN: Write EDID of DVI OUT to HDMI SAVE2.

10. Push VGA+RUN for 2 to 4 seconds: Jump from Program Area to Boot Area.

See also other documents in the category RGBLink Equipment: