beautypg.com

RGBLink MSP 221 Quick Start User Manual

View size the world, Quick start, Msp 221

background image

Interfaces

4

DVI Output

2

Indicator

NOTE

5

HDMI Input

6

1

Power Interface

VGA Input

HDMI Input

USB Interface

Output Inteface

Operation Manual

3

VGA Input

USB Interface

4

VGA Output

1

DVI Output

VGA Output

Program Area

Operation Manual

1. Power on, the 7 buttons will light one by one, and
then all lights go out.
2. VGA+WRITE+SAVE1+RUN:
Write EDID of VGA SAVE1 to VGA IN.
3. VGA+WRITE+SAVE2+RUN:
Write EDID of VGA SAVE2 to VGA IN.
4. VGA+READ+SAVE1+RUN:
Write EDID of VGA OUT to VGA SAVE1.
5. VGA+READ+SAVE2+RUN:
Write EDID of VGA OUT to VGA SAVE2.
6. HDMI+WRITE+SAVE1+RUN:
Write EDID of HDMI SAVE1 to HDMI IN.
7. HDMI+WRITE+SAVE2+RUN:
Write EDID of HDMI SAVE2 to HDMI IN.
8. HDMI+READ+SAVE1+RUN:
Write EDID of DVI OUT to HDMI SAVE1.
9. HDMI+READ+SAVE2+RUN:
Write EDID of DVI OUT to HDMI SAVE2.
10. Push VGA+RUN for 2 to 4 seconds:
Jump from Program Area to Boot Area.

VIEW SIZE THE WORLD

MSP 221 –

Quick Start

This quick start provides basic instructions for an experienced

installer to set up and operate the MSP 221.

For full installation, configuration, and operation details, please refer to
the MSP 221 user manual, which is available at www.rgblink.com.

Interface Description
Input and Other Interface

Input the video signal from H D player,
DVD, and computer, etc.

Input the video signal from HD player,
DVD, set top box, computer, disk, etc.

Power indicator 2 lights when device has power supply.
LED indicator 5 lights when connect USB to computer.

Indicator

Power

Connect one end of the power adapter with the device,
the other end into a socket. Plug in, power indictor light
means the device works normally.
The device uses the standard 12V/3A power supply.

Used to control the computer and upgrade.

MSP 221 Quick Start

Version 1.0

Page 1 of 2

Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax:00865925771202

Email: [email protected]

http://www.rgblink.cn

Connect to the monitor or LED screen
which has DVI interface.

Can connect to the device with VGA
input or VGA monitor.