RGBLink VENUS X2 Quick Start User Manual
Page 17
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
16
Paste Layer: Put the mouse on the window to be copied, right click the mouse, select
“Copy Layer”, then right click in output screen zone of controlling software, and select
“paste Layer”.
Adjust Window: Two ways can change the size and location of the opened window:
a. Drag and drop the opened window by mouse. The details are: move the mouse to the
lower right brink of the opened window, when the mous
e shows”<—>”, press the left key of
the mouse and drag the window to a suitable size and then release the mouse. Move the
mouse to the opened window and press the left key of the mouse and move the mouse, then
the window will be moved, release the mouse when moved to the suitable location. But this
method can only adjust the size and location roughly, if an accurate adjustment is needed,
the second method can be used.
b. Put the mouse on the window to be adjusted, right cl
ick the mouse. Select the “Property”
and the exemplary interface will appear, adjust precisely by “X”, “Y”, Width” and “Height’.
Full or Close Window: Click the icon “
” at the upper right corner to full cell and click the