RGBLink MSP 203 User Manual - Manual (Page 35)

MSP 203 User Manual 35
A. Specification
SDI Input
Number of Inputs
1
Connector Standard BNC Socket
Tramsmission speed 19.4Mbps~3Gbps
Supported Standard
ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292,
SMPTE 297
Balance
Belden 1694A 100m self-adaptive 3G,200m self-adaptive
1.485G,350m self-adaptive 270Mbps
Signal Level TMDS pwl , 165MHz bandwidth
SDI Loop Out
Number of Inputs
1
Signal Level 800mV±10%
DC Offset 0V±0.5V
Output resolution
（ Supported Standards）
625/25 PAL, 525/29.97 NTSC,
720p50/59.94/60, 1080i50/59.94/60,
1080p23.98/24/25/29.97/30, 1080P50/59.94/60
Driver Belden 1694A 150mself-adaptive 3G, 200m selt-adptive
1.485G,350m selt-adaptive SD 270Mbps
Audio Input
Number of inputs
2
connector Standard 1/4” socket
Audio standard 48Kbps 24bit balance analog audio, or 48KHz 24bit AES
audio
HDMI Output
Number of outputs
1
Connector HDMI standard type A interface
Output resolution
（ Supported Standards）
625/25 PAL, 525/29.97 NTSC,
720p50/59.94/60, 1080i50/59.94/60,
1080p23.98/24/25/29.97/30, 1080P50/59.94/60
Standard HDMI 1.3
Function
PPM
No support
TSL No support
Format Conversion No support
Frame Rate Conversion No Support
Extras
Assignment control
USB or dial switch
Power Supply +12V standard 3.5” interface power module