Denon AVR-1312 - Manual (Page 40)

37
Adjusting the sound field effects
Setting items Setting details
Center Image
Assign center channel
signal to front left and right
channels for wider sound. 0.0 – 1.0 (0.3)
“Center Image” is displayed when the surround mode is set to “DTS
NEO:6 Music”.
Panorama
Assign front L/R signal also
to surround channels for
wider sound. ON : Set.
OFF : Do not set.
“Panorama” is displayed when the surround mode is set to “PL gx
Music” or “PL g Music”.
Dimension
Shift sound image center
to front or rear to adjust
playback balance. 0 – 6 (3)
“Dimension” is displayed when the surround mode is set to “PL gx
Music” or “PL g Music”.
Center Width
Assign center channel
signal to front left and right
channels for wider sound. 0 – 7 (3)
“Center Width” is displayed when the surround mode is set to “PL gx
Music” or “PL g Music”.
AFDM
(Auto flag detect mode)
Detect the source’s
surround back channel
signal and set the
optimum surround mode
automatically. ON : Set.
OFF : Do not set.
[Example] Playing Dolby Digital software (with EX flag)
• When “AFDM” is set to “ON”, the surround mode is automatically set
to the DOLBY D + PL gx C mode.
• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and
“Audio Adjust” – “SB CH OUT” to “MTRX ON”.
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when “AFDM” is set to
“ON”, set “Audio Adjust” – “SB CH OUT” to “MTRX ON” or “PL
gx
C”.
D.Comp
Compress dynamic range
(difference between loud
and soft sounds). Low / Mid / High : These set the compression level.
OFF : Turn dynamic range compression off.
DRC
Compress dynamic range
(difference between loud
and soft sounds). Auto : Automatic dynamic range compression on/off control according to
source. This can be set in the Dolby TrueHD mode.
Low / Mid / High : These set the compression level.
OFF : Dynamic range compression always off.
Setting items Setting details
SB CH OUT
Sets the method of
generating of the surround
back channel. n For 2-channel sources
ON : The surround back channel is used.
OFF : No signal is played from the surround back channels.
n For multi-channel sources
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
ES MTRX
z1 : Generate and play the surround back signals from the
surround channel signals of the DTS source.
ES DSCRT
z2 : Play the surround back signals included in the
6.1-channel DTS source.
PL
gx C z3 : Generate and play the surround back signals by decoding
the signals in the Dolby Pro Logic gx Cinema mode.
PL gx M : Generate and play the surround back signals by decoding the
signals in the Dolby Pro Logic gx Music mode.
OFF : Do not play the surround back channel.
z1 This can be selected when playing DTS sources.
z2 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z3 This can be selected when “Speaker Config.” – “Surround Back”
( C page 5 “Speaker Config.” ) is set to other than “None”.
If the source being played contains a surround back signal, the decoder
type is automatically selected by the AFDM function. Set “AFDM” to
“OFF” to switch to your preferred decoder.
NOTE
If the setting in “Speaker Config.” – “Surround Back” ( C page 5
“Speaker Config.” ) is “None”, “SB CH OUT” is not displayed.
Subwoofer
Turn subwoofer output on
and off. ON : The subwoofer is used.
OFF : The subwoofer is not used.
NOTE
This can be set when the surround mode is “DIRECT” ( vpage 21 ) and
the “SW Mode” ( C page 6 “Bass Setting” ) is “LFE+Main”.
Default
The “Audio Adjust” settings
are returned to the default
settings. Yes : Reset to the defaults.
No : Do not reset to the defaults.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
BD