Selecting a listening mode (surround mode), Listening mode – Denon AVR-1312 User Manual
Page 22
19
• Some listening modes cannot be selected, depending on the audio
format or number of channels of the input signal. For details, see
“Types of input signals, and corresponding surround modes”
(
vpage 50
).
• Adjust the sound field effect with the menu “Audio Adjust”
(
vpage 36
) to enjoy your favorite sound mode.
• Buttons on the remote control unit can be
used for operations.
Press
SURROUND
0
or
SURROUND
1
and
the modes are switched as shown below.
DIRECT
STEREO
PLg (or PLgx)
z
DTS NEO:6
z
MULTI CH STEREO
z
VIRTUAL
z
z The display varies depending on the audio format or the number of
channels of input signals.
Selecting a listening mode (Surround mode)
This unit can play input audio signals in multi-channel surround mode or in stereo mode.
Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking.
Listening Mode
Input audio
signal
Playback
Listening mode
2-channel
Multi channel
Surround
Standard playback
(
vpage 20
)
For 2-channel signal input:
• Surround-channel signals are created and played with surround playback.
For multichannel signal input:
• The surround signal recorded in source is played as surround playback.
(The sound is played according to the settings of the speaker size in
C
page 5 “Speaker Config.”
.)
• Surround-back-channel signals that are not recorded in source can be
created.
2-channel
Multi channel
Surround
Multi channel
stereo playback
(
vpage 21
)
This mode is for enjoying stereo sound from all speakers.
2-channel
Multi channel
Surround
Virtual playback
(
vpage 21
)
This mode is for enjoying surround effects using only the front speakers
or headphones.
2-channel
Multi channel
Stereo
Stereo playback
(
vpage 21
)
• If multichannel signals are input, they are mixed down to 2-channel audio
and are played.
• Subwoofer signals are also output.
2-channel
Multi channel
Stereo
Surround
Direct playback
(
vpage 21
)
Sound recorded in source is played as is.
• Surround back signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (
vpage 38
)
• RESTORER (
vpage 39
)
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion