Denon AVR-1312 - Manual (Page 38)

35
Option Setup
Other Setup
Default settings are underlined.
Make various other settings.
Setting items Setting details
HDMI Audio Out
Select HDMI audio output
device. Amp : Play back through speakers connected to the receiver.
TV : Play back through TV connected to the receiver.
If “TV” is selected, only an HDMI audio signal is output from the TV.
Auto Surround
Make setting for
memorizing surround mode
setting for each input signal
type. ON : Memorize settings. Automatically play with the last used surround
mode.
OFF : Do not memorize settings. Surround mode does not change
according to input signal.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q
Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r LPCM Multi-channel signals
Display
Adjust the display
brightness of this unit. Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for
operations.
Each time
DIMMER is pressed, the setting is
changed as shown below.
Bright Dim
Dark OFF
Setting items Setting details
Setup Lock
Protect settings from
inadvertent change. ON : Turn protection on.
OFF : Turn protection off.
To turn OFF the “Setup Lock”, follow the
procedure below.
q Press and hold MENU for at least 3 seconds.
“Setup Lock: 0ON 1” appears on the display.
w Press p to select “OFF”, and then press
ENTER .
NOTE
When “Setup Lock” is set to “ON”, the settings listed below can no
longer be changed. Also, “Setup Lock!” is displayed if you attempt to
operate related settings.
• Menu operations
• Channel Level
• RESTORER • Audio Adjust
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
BD