Rena EasyFeed 120 User Manual
Page 5
EasyFeed_120_Operations_
4-25-14
5
•
You must unplug the feeder and have it checked by an authorized service technician in the
following circumstances:
- If the power cable or power plug has worn or been damaged.
- If water or other liquid has penetrated the feeder.
- If the feeder does not operate properly even after the operating instr uctions have been
followed.
- If the feeder has been dropped or its housing is damaged.
- If the feeder shows marked discrepancies from nor mal operation.
•
Do not dismantle the feeder beyond the level described in this manual. The housing must not
be opened by unauthorized persons. Repairs may be carried out only by authorized service
personnel.
•
Prohibition of conversions: any conversions or modifications carried out by unauthorized
persons are prohibited for reasons of safety.
•
This is a class-A instrument. It may disturb radio equipment in the home or office. If this
happens, the operator may be required to take appropriate action.
Location of the Feeder
•
When setting up the feeder, ensure that it is placed on a smooth and level surface which is
wider than the feeder.
•
The surface on which the feeder stands must be sufficiently stable. If the feeder tips or is
dropped, this may lead to personal injury or damage to the feeder.
•
Select an installation or storage location which protects all parts of the feeder from direct
sunlight, excessive heat and extreme temperature/humidity fluctuations.
•
The feeder must not be exposed to vibrations or shocks.
•
Position the feeder so that you can pull the power plug from its socket easily, at any time.