Setting up the feeder – Rena EasyFeed 120 User Manual

Page 10

Text mode
Original mode

EasyFeed_120_Operations_

4-25-14

SETTING UP THE FEEDER

Setting up the feeder entails five different steps:
1. Setting the PAPER GUIDES
2. Setting the BELT POSITIONS
3. Setting the SEPARATORS
4. Setting the BACK WEDGE
5. Setting the EJECT ROLLERS

NOTE: Although it not required, it is normally best to set up the media in the center of the
feeder. This will allow you to use the BACK WEDGE properly.

NOTE: To get the best results, you should always use as many feed belts and separators as
possible based on the width of your media. Determine how many belts and separators your
media width will allow, keeping in mind that the separators should be positioned between feed
belts.