Rena EasyFeed 120 User Manual

Page 17

EasyFeed_120_Operations_

4-25-14

STEP 3. Place a single piece of your media under the separator and slowly lower each
separator by turning the top knob counter clockwise until the separator tip forces the
stock to "bow" downward slightly between feed belts.

TIPS AND TRICKS FOR USING THE SEPARATORS

The Bow Separators™ on the EasyFeed 120 offer tremendous versatility. Each separator can
be adjusted independently for thickness and lateral position. In addition, since the separators
can be easily removed and replaced, you can utilize as many of them as you need.

1. THIN MEDIA: When running thin stock, try to position the belts within ¼" of each side
of the separators.

2. THICK MEDIA: If your media is thick, like catalogs, a very slight bow under the
separators is all that is necessary for good separation

Bow stock

downward between belts.

(More bow for thinner

documents.)

THIN STOCK

Try to position belts close to

the separators so that the

stock bends down sharply

THICK STOCK

You can position the belts a

bit further away from the

separators and buckle the

stock only slightly.