Rena EasyFeed 120 User Manual
Page 14
EasyFeed_120_Operations_
4-25-14
14
SETTING THE BELT POSITIONS
STEP 1. With the motor running, position the remaining belts generally evenly, with
approximately a 1¼” gap between the larger belts. The separators will be positioned
between feed belts.
Normally the belts will give the best performance when evenly spaced across the
document, with just enough room between them for the separators.
The following pictures show the proper belt and separator positions
for many common size documents:
Tri-fold mailers, #10 envelopes
or other narrow documents.
Two belts and one separator
5 ½” wide mailers, 5 or 6”
postcards or booklets
Three belts and two separators
With feeder running, loosen knob
and move belt guide block by
pressing against the block.
DO NOT TOUCH MOVING BELTS!