Remotec BXT-120 V2.0 - Manual (Page 42)

42
♦ Press the key on original remote
before learning mode timeout.
♦ Keep away from incandescent light
and direct sunlight during learning.
♦ Make sure IR Transmitter of your
original remote alight with learning
diode of BXT‐120, you may also
slight adjust closer or further away
the distance of two devices. Some
of remotes the IR transmitter in
hidden behind lens and may not
installed center of remote.
♦ Make sure the power is good on
both devices, especially the original
remote. Use fresh batteries.)
iii) Click “Delete” button to delete it.
⇓