Remotec BXT-120 V2.0 - Manual (Page 40)

40
ii) Click “Learn” button to learn the
command.
(Place the BXT‐120 and your device
remote as shown, aimed at each
other 1‐3 inches apart.
Press and keep holding the key on
your original equipment remote
which you want to learn until LED
flash and prompt on the screen the
learning result, it may take few
seconds or more depending on IR
codes of your remote.)
⇓
=> LED flashes
twice if the
command has
been learned
successfully
=> LED flashes 6
times, it shows an
error in the
learning process
(Adjust the
position of your
remote and
repeat the
learning
procedure)