Q-See MODEL QC40196 - Manual (Page 18)

34 35
CHAPTER 5 MENUS
MENUS CHAPTER 5
RS232
MAIN
MENU
Backup
Information
Setting
Search
Advanced
Shutdown
HDD Info
BPS
Log
Version
Online Users
General
Encode
Schedule
RS232
Network
Alarm
Detect
Pan/Tilt/Zoom
Display
Default
HDD Mgmnt
Alarm Output
Abnormality
Manual Rec.
Account
Auto Maint.
TV Adjust
Once you’re ready to move beyond basic operation, the other menus in the system will allow
you to configure the DVR to your individual needs.
5.1 MAIN MENU
The Main Menu can be accessed at any time from the Live View by right-clicking the mouse
and bringing up the Short Cut Menu. Pressing the Return button on the side of the DVR will
also bring up the Main Menu.
There are six submenus available;
Search,
Info, Setting, Advanced, Backup and
Shutdown. Clicking on an icon will take you
to that function or the submenu it represents.
The
Search menu is covered in Section 4.5
Search and Playback.
PICTURE 5-1
PICTURE 5-2
PICTURE 5-3
5.2 INFO MENU
Double-clicking on the Info icon will open the Info window. There are five items: HDD (Hard
Disk Drive)
Info, BPS (data stream statistics), Log, Version and Online Users.
HDD INFORMATION
This window displays information on the type, size, available space and status of the system’s
internal hard drive.
The system supports a single SATA hard
drive and it will be designated SATA 1. Below
the drive name is the drive status indicator.
“O” Drive is operating normally.
“X” Indicates an error
“-“ Hard drive not installed
“?”Hard drive is damaged