D-Link DKVM-8E - Manual (Page 19)

- 17 -
1. A PC can be disconnected and reconnected to the
same or different port of the DKVM-8E without having
to power it off as long as it is not the Daisy-chain port
or pass through port.
2. When the pass through port is active and selected,
you must switch to a different port before you change
the configuration, and then you can switch back to the
pass through port.
3. You may unplug the mouse or the keyboard from the
console port and plug it back in at any time.
N
OTE
:
Some O.S. (Operation Systems) like SCO Unix are unable
to support “ Hot Plug ” function. If you apply “Hot Plug” to
this kind of O.S., it will cause unpredictable behavior or
shut down the PC. Before attempting to use “ Hot Plug ”,
please make sure your O.S. and software driver supports
the “Hot Plug” function.