D-Link DKVM-8E - Manual (Page 13)

- 11 -
Usage
The power on state of DKVM-8E
When you power on KVM switch, it will ask for the
password, the default password value is eight
zero –“ 00000000 “. Please key in eight zero and enter the
same value at retype field.
Note:
Before you are not familiar with the operation of OSD
manual, please don’t change the password – i.e. keep the
default eight zero (00000000) value. Otherwise, if you have
set the password and unfortunately forget the password,
you will need to contact supplier (D-Link) to have the unit
re-set.
The Push Buttons
Pressing the button cyclically through all the ports.
1 2 3 4 5 6 7 8
Port Status
Port Select