D-Link DKVM-8E User Manual
Page 10
- 8 -
Now the PC connections will be made with the monitor
(VGA) connections first. Connect a VGA cable (15-pin
HDDB Male / Male) with the Male side to both of the PC
and the rear panel of the DKVM-8E unit to the connector
labeled VGA. Repeat this for all PCs.
Step 6
Connect the first computer’s mouse cable to the DKVM-8E.
If using a PS/2 cable, connect one end to the PS/2 mouse
port on the computer, and the other end to the PC1 PS/2
mouse port on the back of DKVM-8E.
Back of PC
Back of PC