REMKO DN 25 - Manual (Page 3)

3
Description
The three-way switching valve controls
the flow of domestic water or a separate
cooling circuit (four pipe system).
It is comprised of an electrical actuator
and a hydraulic lower section.
Due to its shape, the installed cylindrical
gate valve allows the medium to be re-
directed in a way which is not depend-
ent on the differential pressure.
This gate valve is controlled by an ac-
tuator.
The gate valve can also be operated
manually via a lever located on the plas-
tic housing.
This makes it possible to also operate
the three-way switching valve by hand,
without the electric motor.
The housing consists of corrosion-resist-
ant gunmetal (bronze).
The connections have a 1" external
thread on both the inlet and outlet
sides.
Warranty
The warranty conditions are listed in the
"General terms and conditions".
Please contact your contractual partner
in the first instance.
Environmental pro-
tection and recycling
Disposing of packaging
All products are packed for transport
in environmentally friendly materials.
You can make a valuable contribution
to reducing waste and sustaining raw
materials by only disposing of packaging
at approved collection points.
Disposal of
components
The manufacturing process for the
units is subject to continuous qual-
ity control. Only high-grade materials are
processed, the majority of which
are recyclable. You can also
contribute to environmental protec-
tion by only disposing of components
in accordance with local regulations and
in an environmentally safe manner, e.g.
through authorised disposal and recycling
specialists or at collection
points.
This operating manual is a translation of the German original, Version W-10