REMKO HTK 100 - Manual (Page 18)

18
Technical Data
Model HTK 100 HTK 160
rated heat power max. kW 88 160
rated heat output kW 80 146
rated air output 1) m³/h 6,260 12.780
pressure, max. complete Pa 480 680
fuel heating oil or diesel (DIN 51603)
fuel consumption, max. L/h 8,6 15,7
oil nozzle (Danfoss) 2) USG 1,75 / 60°S 3,00 / 80°S
pump pressure, approx. 2) bar 12,5 13,5
waste gas emissions, max. % 9 9
waste gas volume, approx. kg/h 138 250
furnace resistance, approx. Pa 100 110
required chimney draught Pa 0 0
electrical connection V/Hz 400 / 3~N / 50
power consumption max. kW 2,45 4,4
rated current max. A 6,6 10
power consumption ( oil preheater ) W 30 30
fuse protection (supplied) A 16 16
increase of temperature ( ∆
t
) K 42 41
sound pressure level L
pA
1m 3) dB (A) 62 66
air outlet Ø mm 400 500
waste gas connection Ø mm 150 200
length, total mm 1.905 2.380
width, total mm 660 785
height, total mm 1.070 1,245
weight with burner kg 240 385
We reserve the right to make changes to dimensions and design in the interest of technical progress.
1) ∆
t
45K / 1,2 kg/m³)
2) The mentioned nozzle-sizes and pump pressures were determined on the basis of adjustment tests on test units. The oil throughput had been
measured out. The specifications serve only as guidelines due to product-specific differences in nozzle and pressure tolerances and oil temperature.
3) Noise measuring (with hose / and without burner)