REMKO MKT 290 - Manual (Page 5)

Control panel
Recessd grip
Front view
Rear view
Invrared receiver
Air directing
plate fins
Transport rollers
Air filter
Air inlet
Air outlet hose
Exhaust air
outlet
Condensate drain spout with plug
Air inlet exhaust air
Air outlet
The equipment is shipped in sturdy
transport packaging. Immediately
check the equipment on delivery
and make note of any damage or
missing parts on the delivery note
and inform the forwarding agent
and your contractual partner.
No warranty can be assumed for
later claims.
Transport and
Packaging
The device is particularly suited for
flexible operation.
The mobile air conditioning unit
is comprised for setting up on the
floor indoors. and has an exhaust
tube to dissipate the heat..
The indoor unit will located in
the room to be cooled heat in the
evaporator (heat exchanger) and
transfers it to the internal cooling
circuit. This is the heat of a further
heat exchanger (condenser) via the
flexible exhaust hose into the open
again.
The condensate collected during
cooling operation is transported
to the outdoor unit by means of a
condensate pump integrated into
the indoor unit and evaporates via
the heat exchanger.
The device filters and dehumidi-
fies the air and thereby creates
a comfortable room climate.
It works fully automatically and
offers numerous additional op-
tions thanks to its microprocessor
control system. The device can be
conveniently operated by means
of the infrared remote control unit
included.
Equipment description
5