REMKO MKT 260 - Manual (Page 4)

4
Safety Instructions
Extensive tests have been conducted on the material,
functionality and quality of the REMKO portable air con-
ditioner to ensure that it is a high-performance unit with
a long service life.
Hazards may nevertheless arise if the unit is used by
persons not familiar with its operation or if the unit is not
used for its intended purpose.
Please make sure to follow these safety instructions.
◊ The unit is not suitable for outdoor operation.
◊ Do not set up or operate the unit in rooms suscepti-
ble to explosions.
◊ Ensure that the unit is set up at a safe distance from
flammable materials.
◊ Do not set up or operate the unit if the atmosphere is
contaminated by oil, sulfur or salt.
◊ Do not set the unit up near curtains or drapes.
Minimum distance of 50 cm.
◊ Ensure that the air intake and outlet openings are al-
ways clear of foreign objects.
◊ Ensure that the air conditioner is securely placed on
a level surface.
◊ The unit may only be operated in an upright position.
◊ Do not insert any foreign objects into the air intake
or outlet openings.
◊ Do not place any heavy or warm objects on top of
the unit.
◊ Do not expose the unit to direct streams of water.
◊ Operate the unit only within its permissible operating
ranges.
Pay attention to surrounding temperatures.
◊ This unit may only be connected to a correctly in-
stalled, grounded and fused plug socket.
230V / 50Hz, fuse 10A.
◊ When unplugging the unit, do not pull the power too
forcefully or bend it too much.
This may result in damage to the cable!
◊ Do not move the unit while in operation. Wait at least
5 minutes before starting the unit after it has been
moved.
This protects the unit from damage.
◊ Switch the unit off by pressing the “Power” button.
◊ Do not switch the unit off by unplugging the power
cord.
◊ Do not transport the unit during operation.
◊ Do not place the unit on its side.
◊ Protect all electrical cables from being damaged, for
example, by animals.
◊ Make sure that all extension cables are suitable in
terms of capacity, length and intended use.
◊ Do not lay any lines under carpets.
◊ Never operate the unit without the air filter!
◊ Never aim the air current directly at people!
◊ Never open the unit housing!
This may cause an electric shock.
◊ Work on the cooling system and on the electrical
equipment may only be performed by an authorised
service centre.
Transport and Packaging
All units are subject to continuous quality control and
are carefully packaged before being sent.
The device is shipped in a stable transport box made of
cardboard. Please examine the unit when it is deliv-
ered.
Make note of any damage or missing parts on the ship-
ping bill and inform the shipping company and your
contract partner. No liability is assumed for subsequent
claims.
Please observe the following for transport:
◊ Before transporting the unit, switch it off on the con-
trol panel and unplug the power cable.
◊ The unit may only be transported in an upright posi-
tion.
◊ The unit is equipped with wheels and two handles to
make transport easier.
◊ Excess condensation is collected in the internal tank
of the unit. We recommend removing this water prior
to transport via the drain at the back of the unit.
Operation/handling which does not comply with
these instructions is prohibited!
In cases of non-compliance, we assume no liability
and the guarantee becomes null and void.
*