Re-installing the application software, 4 re-installing the application software – QVidium QVENC Encoder v17 User Manual
Page 47
User’s Manual v.17
QVidium
®
H.264 HD Video Codecs
™
Copyright 2011-2015 QVidium
®
Technologies, Inc.
Page 47 of 73
DCE (Data Communications Equipment). There is no login prompt. Once connected, you connect
directly to a Borne shell.
Now that you have access the console, type
“passwd” and follow the prompts to temporarily
change the password.
Next, please type “rm /flash/qvidium/httpd.conf” to remove the password
from the web server configuration.
You can then type “/etc/init.d/rc.httpd restart” to restart the web
server with this new password.
9.4 Re-installing the Application Software
If for some reason the QVPRO codec becomes completely unresponsive, or you suspect that as a
result of a failed update procedure the application memory had somehow become corrupted, you
can completely reinstall the application software with the following procedure. The Linux Kernel is
loaded into a separate area of memory and is unlikely to become corrupted, so if the system does
not respond to this procedure, you may have a hardware problem and you should consult a
QVidium technical expert.
Application Memory Reload Procedure:
i. Go t
and download and save the QVPRO-XX.pkg file to a
USB flash stick. This file is about 9 Mbytes. (XX is the version number of the application
software.)
ii. Go t
lick on Reset Software, and download and save the
resulting “autorun” file to the same USB flash stick.
iii. Insert the flash stick and wait about one minute. Then power cycle the codec.