Quintum Technologies CDR - Manual (Page 14)

Quintum Tenor CMS CDR Page 12
Settings 4 & 104
Includes all “Extended-CMS” Fields plus:
V Null (blank) Auto Switch Duration The number of seconds that the AutoSwitch call
was active. Valid entry: time in seconds.
W 0 Bad IP Quality Events The number of bad quality events that occur
during a VoIP call. This number determines the
overall quality of a call.
X 0 Auto Switch Flag The terminating side of the AutoSwitch call initially
terminates to the internal AutoSwitch agent before
the call is actually autoswitched. This termination
generates an extra CDR in addition to the original
call that is autoswitched. This field identifies a call
that is terminated to the AutoSwitch agent. 0 =
normal call, 1 = termination to the AutoSwitch
agent.
Y 14155551000 Calling Party Number The Number called from. The format will be
delivered in whatever format the PSTN (Trunk-
Side) or PBX (Line-Side) delivers to the Tenor. It
will not necessarily be in International format.
Z 12345678901234 PIN Code PIN Code entered. 14 digits maximum. This field
will be blank if a PIN is not configured.
AA 123456789 Local Call ID # Unique identification number, generated by the
local-side Tenor, for call record matching
purposes. Generated for all calls. **
BB 987654321 Remote Call ID # Unique identification number, generated by the
remote-side Tenor, for call record matching
purposes. Only generated for IP calls.
**
Table 6: Extended-CMS Format - Settings 4 & 104
ID Sample Setting Field Name Definition
AC 12138765432 Incoming/Outgoing IP
DN If this is an Incoming IP Call, the number
displayed will be the number as received from the
other endpoint. If this is an Outgoing IP Call, the
number displayed will be the DN as it was sent out
over IP. (Outgoing Number plus any prepended
digits)
Table 5: Extended-CMS Format - Settings 3 & 103
ID Sample Setting Field Name Definition