Quintum Technologies CDR - Manual (Page 13)

Quintum Tenor CMS CDR Page 11
M 5 Incoming Slot If the call is incoming, this field identifies which
Slot the call came in on. Valid entry: 1 through 13.
This field will be empty if the call is an incoming
VoIP call.N
N 1 Incoming Device If the call is incoming, this field identifies which
Device channel the call came in on. Valid entry: 1-
4. This field will be empty if the call is an incoming
VoIP call.
O 1 Incoming Digital
Interface If the call is incoming, this field identifies which
Digital Interface the call came in on. Valid entry: 1
through 8. This field will be empty if the call is an
incoming VoIP call.
P 1 Incoming Channel If the call is incoming, this field identifies which
channel the call came in on. Valid entry: 1-31. This
field will be empty if the call is an incoming VoIP
call.
Q 3 Outgoing Slot If the call is outgoing, this field identifies the Slot
the call is going out on. Valid entry: 1 through 13.
This field will be empty if the call is an outgoing
VoIP call.
R 1 Outgoing Device If the call is outgoing, this field identifies the
Device the call is going out on. Valid entry: 1
through 4. This field will be empty if the call is an
outgoing VoIP call.
S 4 Outgoing Digital
Interface If the call is outgoing, this field identifies which
Digital Interface the call is going out on. Valid
entry: 1 through 8. This field will be empty if the
call is an outgoing VoIP call.
T 1 Outgoing Channel If the call is outgoing, this field identifies which
channel the call went out on. Valid entry: 1-31.
This field will be empty if the call is an outgoing
VoIP call
U Null (blank) Auto Switch Time This is the date and time the AutoSwitch occurred
(when the call is switched from VoIP to circuit).
The entry will be in the following format:
yyyymmddhhmmss where yyyy (4 digits for year),
mm (2 digits for month), dd (2 digits for day), hh (2
digits for hour), mm (2 digits for minutes), ss (2
digits for seconds). If an AutoSwitch did not occur,
this field will be blank.
Table 5: Extended-CMS Format - Settings 3 & 103
ID Sample Setting Field Name Definition